Comtech EF Data M&C Software for Windows - Manual (Page 17)

2–1
Chapter 2. OPERATION
This chapter provides information regarding the operation of the M&C software.
2.1 Supported Terminals
The initial release of this software supports the KST-2000(A/B/L).
In future revisions, the application will support the following Comtech EF Data RF
terminals:
• RFT-500 (2.5 MHz, 125 kHz, and Multi-carrier)
• RFT-505
• RFT-700
• RFT-705
The M&C displays (N/A) in front of non-supported RFT terminals on the configuration
dialog box. If a non-supported RFT is chosen for the active configuration the application
responds with the following dialog box (Figure 2-1).
Figure 2-1. M&C Non-support Warning Dialog Box