Compuprint SP40 plus - Manual (Page 9)

User Manual
MAN10239-01 4
Printer Installation
Choosing a Suitable Location
Consider the following points when you choose the location for your printer:
The distance between the printer and the host computer must not exceed the length of the interface cable;
The location must be sturdy, horizontal and stable;
Your printer must not be exposed to direct sunlight, extreme heat, cold, dust or humidity;
When printing on standard paper formats, the paper comes out
partially on the rear side of the printer. Make sure that behind the
printer there is sufficient clearance to correctly move the paper.
Installing the Power Cable
1. Find the power cable connector and the rating plate on the rear side of the printer.
Always use a grounded outlet
2.
Insert the power cable into the connector
on the printer and the other end into a
convenient mains outlet.
3. Press the key on the right side of the
printer front to power the printer on.