Compuprint SP40 plus - Manual (Page 42)

User Manual
MAN10239-01 37
Not-Recoverable errors
When an error of this kind occurs:
1. The printer is halted with all the four leds flashing.
2. With operator panel with display, the following messages will be displayed; the first line indicates the
error, while the second line gives more details concerning the error conditions.
Power-off and Power-on the printer.
It the problem remains contact the service.
Not-Recoverable error messages description
Upper line message
Lower line message
Indication Solution
ENGINE FAULT
The software of the printer
detects an engine failure
during the initialization phase. The problem may depends by the home
carriage or paper sensor initialization errors.
Check for paper inside the paper path.
Check for the carriage free movement.
SOFTWARE FAULT
**SUPERVISOR**
The software of the printer
detects a failure during the
displayed phase. The problem may depends by an internal
software routine error.
SOFTWARE FAULT
**PARSER**
The software of the printer
detects a failure during the
displayed phase. The problem may depends by an internal
software routine error.
SOFTWARE FAULT
*PRINT MANAGER*
The software of the printer
detects a failure during the
displayed phase. The problem may depends by an internal
software routine error.
SOFTWARE FAULT
**ENGINE**
The software of the printer
detects a failure during the
displayed phase. The problem may depends by an internal
software routine error.
SOFTWARE FAULT
**LAN**
The software of the printer
detects a failure during the
displayed phase. The problem may depends by an internal
software routine error (only with LAN
interface)