Compuprint SP40 plus - Manual (Page 29)

User Manual
MAN10239-01 24
Setup Parameter
Values Description
CODE PAGE CP437*, CP437G, 96GREEK,
CP850, CP851, CP852, CP853,
CP855, CP857, CP858, CP860,
CP862, CP863, CP864, CP865,
CP866, CP867, CP876, CP877,
CP1098, CP1250, CP1251,
CP1252, CP1257, GOST, TASS,
MAZOWIA, CP437SL, UKRAIN,
KOI8-U, 8859/1, 8859/2, 8859/3,
8859/4, 8859/5, 8859/6, 8859/7,
8859/8, 8859/9, 8859/15,
ROMAN-8, ID 12, CP874, ID 14,
ID 17, SANYO, KU, PHILIP Selects the code page for both the IBM
and the EPSON emulations.
OLIVETTI C-SET CODE PAGE, INTERN.*,
GERMANY, PORTUGAL,
SPAIN1, DEN/NORW, FRANCE,
ITALY, SWE/FIN, SWISS,
G. BRITAIN, USA ASCII,
GREECE, ISRAEL, SPAIN 2,
JUGOSLAVIA, TCV 370,
CANADA, SDC, TURKEY, CIBC,
PC-DEN/NORW, PC-DEN OPE,
PC-210, PC-220, OLI-UNIX Selects the character sets for the
OLIVETTI protocol.
Selecting CODE PAGE, it is possible to
select one of the above Code Pages to
be used with the OLIVETTI protocol.
OLIVETTI COMPRES 17.1 cpi*, 16.6 cpi Selects the compressed pitch in
OLIVETTI protocol.
VERT. RESOLUTION 1/216 inch, 1/240 inch* Sets the vertical character resolution.
Setting used for the OLIVETTI
protocols.
CUT SHEET EJECT on front*, on rear Selects whether the cut sheet loaded
into the printer is ejected towards the
front or the rear of the printer.
PRINT DIRECTION unidir., bidir., sw control* Selects the printing direction of the print
head: unidirectional (unidir.),
bidirectional (bidir.) or selected via
software (sw control).
LINE MODE LF=LF, CR=CR*
CR=LF+CR
LF=LF+CR
LF&CR=LF+CR If the printer receives a LF code (LF), it
only performs a line feed. If the printer
receives a CR code (CR), it only
performs a carriage return.
If the printer receives a CR code (CR), it
performs a carriage return followed by a
line feed. If the printer receives a LF
code (LF), it performs a line feed.
If the printer receives a LF code (LF), it
performs a line feed followed by a
carriage return. If the printer receives a
CR code (CR), it only performs a
carriage return.
If the printer receives a LF code (LF) or
a CR code (CR), it performs both a line
feed and a carriage return.
WRAP MODE truncate, autowrap* The data exceeding the line length are
truncated (truncate) or printed on the
following line (autowrap).
REFERENCE EDGE Left*, right Document reference on left or right, for
software compatibility.