Compuprint SP40 plus - Manual (Page 40)

User Manual
MAN10239-01 35
4.
In case it is not possible to remove the jammed
paper because you cannot reach it with your
hand or it is embedded so that you cannot move
it, rotate the paper belt to free the paper.
5.
Carefully pull down the green lever following the step 3, 4, and 5 in reverse order in order to securely
close the Upper Mechanical Frame.If you do not close the Upper Mechanical Frame, the printer does
not print correctly.
6. Close the printer cover.
Paper Damaged after Printing
If the paper is damaged after printing, it probably does not correspond to the specifications given in this
manual or was not loaded according to the indications given.
Verify that the paper corresponds to the specifications (see
“Paper Specifications” later in this manual) and
has been loaded according to the indications given (see “Paper Handling” before in this manual).
Hexadecimal Dump
The hexadecimal dump function is activated when the ST2 key is press at power-on.
The printer enters in this functions and remains until it is powered-off.
The hexedecimal-dump shows all the characters sent by the host to the printer, even the not-printable ones
as well as escape commands or line terminator.