Bronkhorst Mass Flow - Manual (Page 19)

BRONKHORST HIGH-TECH B.V.
3. Connector LIQUI-FLOW ®
Note:
When connecting the system to other devices (e.g. to PLC), be sure that the integrity of the shielding is not
affected. Do not use unshielded wire terminals.
SERIE 423 99.5672.19.08
8 DIN CONNECTOR BINDER
O-RING
DETAIL
THE CABLE.(THE SHIELD MUST BE AROUND
FOLD THE SHIELD OF THE CABLE BACK OVER
DETAIL
CONNECTED TO THE CONNECTORHOUSING
SHIELD OF THE CABLE SHOULD BE
BLACK TUBING
THE CABLE)
CABLE LIYCY 8x0.25mm 4.0
20 mm
2
SHRINK SOLDERCONTACTS WITH SHRINKTUBING
BRE 160 BLACK OR EQ.
7
3
8
5
2
6
1
4
solder-side
Binder 8-pin
DIN connector female
SHRINK SOLDERCONTACTS WITH SHRINKTUBING
BRE 160 BLACK OR EQ.
8 DIN CONNECTOR AMPHENOL
TRANSPARANT TUBING
C091 31D008 200 2
O-RING
CONNECTED TO THE CONNECTORHOUSING
FOLD THE SHIELD OF THE CABLE BACK OVER
THE CABLE.(THE SHIELD MUST BE AROUND
THE CABLE)
SHIELD OF THE CABLE SHOULD BE
CABLE LIYCY 8x0.25mm
2.5
20 mm
2
METAL RING
solder-side
Amphenol 8-pin
DIN connector female
5
7
3
8
6
2
4
1
9.17.001 page 19