Belshaw Adamatic Snack Master Snack Food Frying System - Manual (Page 6)

Belshaw Bros., Inc.
• www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
iv MN-xxxxEN Snack Master OM
Preface
The Snack Master fryer is designed to
automatically fry fresh cut tortilla chip and other
frozen snack food products utilizing a fully
submerging conveyor.
The Snack Master fryer is designed to be used on
a flat, stationary table or countertop. A specially
designed table come as an option with the full
fryer system. The operator must work safely at
all times and read this manual and follow its
instructions and warnings.
The Snack Master produces only 71.5 dB(A) of
equivalent A-weighted sound pressure at
workstations. This has been determined during a
dry run of the machine, using a Bruel & Kjaer
sound level meter, type 2236.
Study the instructions and warnings in this
manual carefully. A thorough understanding of
how to install, maintain, and safely operate the
Snack Master will prevent production delays and
injuries.
To use the Snack Master fryer safely, heed the
following warnings and all other warnings that
appear in this manual:
• Make sure the machine is secured to the
work surface. Doing so will prevent the
machine from moving or falling, which
could cause serious injury.
• Never let water and hot shortening come
in contact. Moisture causes hot
shortening to spatter, which may cause
serious burns.
• Do not overfill the kettle with
shortening. If shortening overflows the
kettle, it could cause serious burns or
could cause someone to slip on the floor
and be seriously injured.
• Hot shortening can cause serious burns.
Make sure that the system and the
shortening are cool before attempting
any adjustment, repair, disassembly, or
cleaning.
• To avoid electrocution or other injury,
unplug the machine before attempting
any adjustment, repair, disassembly, or
cleaning.
• To avoid damaging the machine, never
use force to assemble, disassemble,
operate, clean, or maintain it.
• Be careful never to get shortening,
water, or other materials on the floor. If
anything does get spilled on the floor,
clean the area immediately. Materials on
the floor can cause people to slip or fall,
resulting in serious injury or loss of life.
• To prevent unintentional startup and
possible fire, unplug the machine if there
is a local power outage. When the
power is restored, it is safe to plug the
machine in again.
• To avoid electrocution, make sure that
all electrical cords are not frayed or
cracked and that they do not pass
through any water or shortening.
• Make sure that all electrical cords are
routed so that no one will trip over them.