Belshaw Adamatic Snack Master Snack Food Frying System User Manual
Page 32
Belshaw Bros., Inc.
• www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
10
MN-1013EN
Snack Master TS
PRODUCT DOES NOT MOVE THROUGH CONVEYOR.
Possible Causes
What To Do
Product is to small for spacing between
conveyors.
Add shorten to insure contact with both upper and
lower conveyor.
Product is to large for spacing between
conveyors
Use smaller product
The shortening level is too low.
Add shortening to reach the proper level.
WARNING
Before doing any of the following, turn off the
machine and allow the shortening to cool.
The fryer is not level.
Level the fryer.