Belshaw Adamatic Snack Master Snack Food Frying System - Manual (Page 29)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Snack Master TS MN-xxxxEN 7
5. Apply 4 to 6 drops of SAE 30 machine oil
through the lubricating hole in the bearing
cap until the felt pad is saturated. See
Figure 2-4.
Figure 2-4. Lubricating the Conveyor Drive
Motor.
6. Carefully put the motor back in the heater
head, bolt the motor to the heater head, and
replace the back cover of the heater head.
Checking the Thermostat
If the quality of your product decreases, check
the accuracy of the thermostat. Heat some
shortening in the fryer, measure the temperature
of the shortening using a thermometer you know
to be accurate, and compare this reading to the
thermostat setting If you need to calibrate the
thermostat, consult the “Electrical Components”
section.
If you ever want to test the continuity of the
thermostat or any of the switches on your Snack
Master, refer to the “Electrical Components”
section.