Belshaw Adamatic Snack Master Snack Food Frying System - Manual (Page 31)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Snack Master TS MN-xxxxEN 9
THE PRODUCT IS UNDERCOOKED.
Possible Causes What To Do
The shortening is not hot enough. Increase the temperature setting.
The conveyor is moving too quickly. Decrease the speed of the conveyor, using the
conveyor speed knob located on the control box.”
The thermostat reads inaccurately. Calibrate the thermostat.
THE PRODUCT IS OVERCOOKED.
Possible Causes What To Do
The shortening is too hot. Decrease the temperature setting.
The conveyor is moving too slowly. Increase the speed of the conveyor, using the
conveyor speed knob located on the control box
The thermostat reads inaccurately. Calibrate the thermostat.