Datalogic Scanning 4410 - Manual (Page 37)

Image Capture
Quick Reference Guide 35
Image Capture
The 2D imager can be used for capturing, manipulating, and transferring
images.
You can set options for image capture in the Imaging Control Panel. Various
image formats can be selected, including TIFF, JPEG and BMP. You can also
scale, rotate, and modify image quality settings. See the PRG for detailed infor-
mation on using the Falcon 2D for image capture.
Flash Memory
In addition to the RAM-based storage standard on Windows CE terminals,
the Falcon is also equipped with Datalight FlashFX Flash-based application
and file storage area. Refer to the PRG for more information.
Saving to Flash
To save an application or data to the Flash Memory, from your current appli-
cation, select
File > Save As > navigate to the FlashFX Disk location as described
below.
Flash FX Location
To access the contents of Flash Memory:
1. Double-tap the My Device icon on the desktop.
2. Double-tap the FlashFX Disk icon to view the FlashFX Disk.
The FlashFX storage memory persists across all reset (warm/cold reboot) condi-
tions and software / firmware updates.
Because of this, Datalogic very strongly recommends installing all applications,
applets, programs, and important data files to the FlashFX disk of the Falcon.
If an application or a data file is only installed or saved in RAM, a hard reset will
result in the loss of that application or data file.