Datalogic Scanning 4410 - Manual (Page 18)

Setting Up the Mobile Computer
16 Falcon
®
4400 Series with Windows
®
CE
Setting Up the Mobile Computer
At first use or after a cold reset, the unit will go through a series of initial
bootup sequences. Each of these sequences are described as noted:
1. Touchscreen Calibration, illustrated in Figure 7 .
2. Getting Connected on page 16 .
3. IP Network Setup on page 17 .
4. Setting the Date and Time on page 19 .
Touchscreen Calibration
Figure 7. Touchscreen Calibration
Getting Connected
Bluetooth Setup
1. Open the Bluetooth control panel at Start > Settings > Control Panel >
Bluetooth Manager .
2. Search for available Bluetooth Devices by tapping the button for the
type of device you want (Printer, Serial or All) .
3. Create a pairing by double tapping the listing for the device you want
and selecting the service. If you want to specify encryption or require
authentication, enable the appropriate checkbox.
4. Tap OK to complete.
Follow the on-screen directions to cali-
brate the touchscreen.
For more information on touchscreen
calibration, refer to the PRG.