Rf setup (summit client utility) – Datalogic Scanning 4410 User Manual

Page 20

Setting Up the Mobile Computer

Falcon

4400 Series with Windows

Figure 8. Modifying Network Connection Settings.

•

IP Address

: Select

DHCP

or set static IP settings.

•

Name Servers

: If using static IP, set

DNS

and

WINS

servers.

RF Setup (Summit Client Utility)

The Summit Client Utility (SCU) is an application designed for users and administra-
tors of mobile devices that use a Summit radio module. Using SCU, you can:

• Disable and enable the radio (turn it off and on)
• View the contents of configuration profiles, or configs, each of which houses

the RF, security, and other settings for the radio

• Select the config to be used to connect to a WLAN
• View global settings, which apply to every config
• View status information on the radio, the access point (AP) or WLAN router to

which it is connected, and the RF connection or link between the two

• Troubleshoot a connection or performance issue, view in-depth diagnostic

information on the connection and the radio, and perform various trouble-
shooting and diagnostic tests

To launch the utility, go to

Start > Settings > Control Panel.

Tap on the

Wi-Fi

icon.

For more detailed information on making changes to settings, please refer to the PRG.