BECKHOFF CX2100­09x4 - Manual (Page 63)

Commissioning
5.2.3 UPS information in the Windows Registry
The UPS service communicates with the Beckhoff UPS driver via the Windows Registry. You can access this
information in read mode. In order to configure the UPS (write), please use the "Beckhoff UPS Configuration
dialog". Caution is required if you wish to directly change the UPS configuration in the Windows Registry
(write).
Status information
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UPS\Status
The keys under here are continuously updated by the UPS driver whenever the status of the UPS changes.
Notice:
Not every UPS device can supply all the status information. Overview of the status information supported
[
} 70].
CX2100­09x4 63 Version 1.1