Basler Electric IDP-800 - Manual (Page 53)

9437600990 Rev F 47
Register Data Description Access Data Format
47306 Protection status bit flags (0 = clear, 1 = condition present):
b0=failed to build up, b1=build-up activated, b2= power input
failure, b3 = crowbar activated, b4 - b15 are unassigned. R- UI16
47307 Annunciation status bit flags (0 = clear, 1 = condition present)
b0=failed to build up, b1=build-up activated, b2= power input
failure, b3 = crowbar activated, b4– b15 are unassigned. R- UI16
DECS-200N Operating Mode Information Category C5
Category C5 holding register assignments and descriptions are listed in Table 7.
Table 7. DECS-200N Operating Mode Information Category C5
Register Data Description Access Data Format
47571 Operating mode ( 0=OFF/ 1=PF/ 2=VAR) R UI16
47572 Unit mode status (1=START, 0=STOP) R UI16
47573 Control mode status (1=FCR, 2=AVR) R UI16
DECS-200N Setpoints Information Category C6
Category C6 holding register assignments and descriptions are listed in Table 8.
Table 8. DECS-200N Setpoints Information Category C6
Register Data Description Access Data Format
47621-22 FCR mode (field current) setpoint RW R32_23
47623-24 AVR mode (generator voltage) setpoint RW R32_23
47625-26 Var mode setpoint in kvar RW R32_23
47627-28 PF mode setpoint RW R32_23
47699-700 FCR minimum setpoint R- R32_23
47701-02 AVR minimum setpoint R- R32_23
47703-04 Var minimum setpoint in kvar R- R32_23
47705-06 PF minimum setpoint R- R32_23
47707-08 FCR maximum setpoint R- R32_23
47709-10 AVR maximum setpoint R- R32_23
47711-12 Var maximum setpoint in kvar R- R32_23
47713-14 PF maximum setpoint R- R32_23
IDP-800 Modbus™ Communication