Basler Electric IDP-800 - Manual (Page 28)

22 9437600990 Rev F
Figure 24. Trending Screen
Capability
Access the Capability screen (Figure 25) by pressing the Capability button on the DECS Metering screen.
By default, a horizontal curve is displayed. Pressing the Vertical Curve button selects a vertical curve
orientation.
Figure 25. Capability Curve Screen
If a plot of the underexcitation limiter (UEL) curves is desired, the Internal UEL Curve button can be
pressed to access the UEL Curve Selection screen (Figure 26). Here, the internal DECS UEL curve can
be selected or a customized, three-, four-, or five-point curve can be selected and configured. UEL curve
points must be selected in the DECS BESTCOMS software for an accurate representation on the
IDP-800. Pressing the None button disables the display of UEL curves.
IDP-800-B Operation IDP-800