Babycare TENS Elle TENS - Manual (Page 13)

Display
To return back to the original BIRTH mode screen, press the CH1- and CH2-
buttons together again.
The Mode Button
There are two mode ranges available on the Elle TENS+, each with a Burst and
Boost function.
Mode 1 (BURST 1 and BOOST 1), which has been described above, is primarily
used for the earlier stages of labour.
Mode 2 (BURST 2 and BOOST 2) usually used when your labour advances and
your contractions become more frequent.
Press the Mode Button to switch between mode ranges. You will see from the
User Display, that the number in the centre of the display will change from 1 to
2 and vice-versa.
N.B. Both modes are interchangeable and can be used according to your
preference, not necessarily for the stage of labour you are in.
CH1 CH2
Using the Elle TENS+ in BIRTH mode
13
Press
Mode