Axel Remote Management V2 - Manual (Page 89)

Axel Remote Management
83
The preferred mode for administrative commands is XML. Compared with RSH
the benefits of XML are:
- Easy firewall administration (only one outgoing TCP port)
- Firmware downloading is faster and does not require TFTP.
Note: XML commands are only supported by AX3000 M75 models equipped
with firmware level 0521b2 and higher.
A.1.2 - RSH-Based Commands
Various standard TCP/IP commands are embedded in the AxRM Software (rsh,
arp, tftp and ping). Depending on your operating system these commands may
also be included in Windows.
An RSH-based administration commands can be emulated from a DOS prompt.
The following table gives for each administration command the equivalent
generic DOS command:
Commands AxRM Commands TCP/IP
Get Terminal Information ping axname
rsh axname ax_version
Get Terminal Network Stats. ping axname
rsh axname ax_getstat
Get Terminal Configuration ping axname
For full set-up info:
rsh axname setup_get > file
For partial set-up:
rsh axname setup_get_lite > file
Reboot ping axname
rsh axname ax_reboot [passwd] [resource]