Axel Remote Management V2 User Manual
Page 85
Axel Remote Management
79
7.3.6 - Remote Access
Click on the "Remote Access" tab to access the parameters for remote access
features. (See Chapter 5.3):
a) Remote Control
The parameters are:
- Encryption: enabled by default.
- Inactivity timer: when a value is selected (from 5 to 30 minutes), the
remote control session is disconnected after the timer expiration.
- AxViewer: only use IP addresses from AxRM database: AxViewer is
separate remote control software. This option allows restricting devices
addressed by AxViewer.
b) Set-up via telnet or COM Port
To enter remotely the interactive set-up, AxRM offers an embedded emulator.
We strongly advise to use this emulator. The single parameter is the font size.
To use a third party emulator, check the box "Use a Third Party Emulator" and
enter the following information:
- Emulator Command: enter the pathname and the name of the emulator.
(The [...] button allows to disk to be browsed).