Axel Remote Management V2 - Manual (Page 29)

Axel Remote Management
23
c) Step 3 - Set-Up the Terminal
This step is optional: the terminal may be configured by the usual AxRM
administration commands.
The terminal can be configured by:
- Downloading a firmware. (See Chapter 5.2.6)
- Sending an existing configuration file. (See Chapter 5.2.5)
- Entering the interactive set-up. (See Chapter 5.3.2 - a)
4.3.2 - Scanning for Terminals
The automatic scan adds all terminals found on the network to the database
The function is invoked from the horizontal menu [Action]-[Discover
Terminals] or from the toolbar.