Axel Remote Management V2 User Manual

Page 56

Text mode
Original mode

Axel Remote Management

- An authorization from the terminal user may be requested to allow to

remote control connection.

5.3.2 - Interactive Set-Up

This functionality allows to remotely enter the terminal interactive set-up.

a) Via the Telnet Protocol (AX3000 and AX4000)

Supported products: AX4000 Office Server and AX3000 Models 65C, 75,
75E, 75B, 75C, 70W and 70F.

To open a 'telnet set-up' session:

- Select the 'Set-up via telnet' connection type,
- Enter port TCP (default 4096),
- Click on [Connect to Axel device].

A window showing the set-up of the Axel terminal is opened:

Note: on the terminal side, the set-up is also displayed. But to avoid conflict the
terminal keyboard is locked. The 'TELNET SETUP' label allows distinguishing
when the set-up is locally or remotely entered.