Avery Dennison 9850 Addendum Version 2.0 User Manual
Page 3
3
C h a n g i n g t h e P r i n t S p e e d
You can change the print speed at the printer or your System Administrator can
send the Print Control Packet.
At the Printer:
To change the setting, from the Main Menu, select Setup, then Supply. Then follow
these steps.
1.
Press l or r until you see
Supply
l Speed r
2.
Press Enter/Pause to set the speed option. You will see the current setting,
for example:
Speed
l 8.0 ips r
3.
Press l or r to see the other options. After you display the option you want,
press Enter/Pause. Press Escape/Clear twice to exit to the Main Menu.
Using a Packet:
Your System Administrator can send the Print Control Packet to adjust the print
speed. Refer to the optional Packet Reference Manual available on our Web site
(www.monarch.com) for more information. You can also order part number
TC9800PM for a printed copy of the Packet Reference Manual.
Use the print control packet (C) to set the contrast, print, and margin adjustment,
print speed, and printhead width.
Syntax {I,C,contrast,print_adj,margin_adjust,
speed_adj,ph_width
¦}
C1. C Print Control Packet
C2. contrast -390 to 156. 0 is the default.
C3. print_adj -99 to 99 in 1/203 inch. 0 is the default. Adjusts where
data prints vertically on the supply. Increase the print
position to move print up, decrease to move print down.