Avery Dennison 9850 Addendum Version 2.0 - Manual (Page 11)

11
B6. column Distance from the lower left edge of
the print area to the pivot point.
Use the previous table for values.
English 0-399
Metric 0-1015
Dots 0-811
NOTE: Allow a minimum of 1/10 inch between the scan edge of
bar code and label edges or other data.
B7. font Use 36 for QR Code.
B8. density Bar code density. Use 0 for QR Code.
B9. height Bar code height, in 1/100 inches, 1/10 mm, or dots.
Minimum values:
English 19
Metric 48
203 Dots 38
300 Dots 57
For QR Codes, the symbol’s height depends on the
number entered for this parameter. For example, if you
enter 80, the symbol could be smaller than .80,” but it will
not be greater than the amount specified in this
parameter.
The printer determines the size of the symbol Small QR
Codes may not be scannable. The user's scanner
determines the functional size (minimum height) of the
symbol.
B10. text Appearance of text with bar code. Options:
0 Default (Model 2)
1 Model 1
2 Model 2
B11. alignment Use L to align data correctly in the field.