Avery Dennison 9850 Addendum Version 2.0 - Manual (Page 19)

19
U s i n g t h e F o n t P a c k e t
You can use a font packet to add or clear downloaded fonts from memory, upload
your font buffer, or upload the cell size information for a particular font. The font
packet is useful when you are downloading fonts. If you are using downloaded
fonts, the font number and the number of bytes each downloaded font uses is
listed.
This packet does not list the number of bytes the standard printer fonts use.
Syntax {W,font#,action,device¦}
W1. W Writable Font Header.
W2. font# Font number from 0-9999.
0 is for all fonts. 1 - 5 digits is the font number.
Example: 11 is the standard printer font,
CG Triumvirate.
W3. action Action. Options:
A Adds the specified font.
C Clears all or specified fonts, except ones in
ROM.
H Uploads font size information.
M Uploads font memory usage information.
NOTE: C does not clear (erase) fonts saved in the printer’s flash
memory or on the SIMM board. You must format flash memory
to erase fonts from the printer’s flash memory or from the SIMM
board. However, when you format flash memory, ALL fonts
saved in the printer’s flash memory OR on the SIMM board are
deleted.
W4. device Device. Options:
F Flash
R Volatile RAM
Z All devices (use for upload).