Avery Dennison 9850 Addendum Version 2.0 - Manual

TC9850AD Rev. AB 8/01

2001 Monarch Marking Systems, Inc. All rights reserved.
O P E R A T O R ' S A D D E N D U M
This addendum describes the software changes available in
release 2.0 of the Monarch
 9850  printer. This addendum contains information
about
♦ using 12 inches per second (ips) printing.
♦ loading supplies.
♦
cleaning the printer.
♦ printing TrueType  and bitmap Asian characters.
♦ defining the Quick Response bar code.
♦
using flash memory.
H i g h S p e e d P r i n t i n g I n f o r m a t i o n
Keep in mind the following special printing considerations.
Print Speed (ips)
inches per second Printing Method Printhead
Density
Knife Peel Mode
2.5/4.0/6.0 ips thermal direct
thermal transfer 203
300 dpi supported supported
8.0 ips thermal direct
thermal transfer 203
300 dpi not supported supported
10.0 ips thermal direct
thermal transfer 203 only not supported not supported
12.0 ips thermal direct
thermal transfer 203 only not supported not supported
♦ The minimum label feed length is 0.75 inches (19 mm) using 8, 10, or 12 ips
printing.
♦
You may need to clean the printhead and platen roller more frequently when
printing at high speeds. See “Cleaning the Printer” for more information.