Avalon Firestyles Panel Set - Manual

Panel Set, Avalon
Travis Industries Page 1 of 2 Printed 11/4/05
CHECK CONDITION OF SHIPMENT
Upon receipt of this kit, check the condition of the packaging. Damage to the package should be noted on
the carrier's freight receipt. Any damage claims as a result of shipping must be handled through the shipper.
Travis Industries will provide assistance in resolving shipping claims or replacing items not included in the
package. Please report any missing items immediately.
COMPATIBILITY
• Avalon Pendleton • Avalon Rainier • Avalon Olympic
ITEMS NEEDED FOR ASSEMBLY
• 5/16” and 3/8" Nutdriver • Small & Large Standard Screwdriver • Drill with 11/64” Bit
PACKING LIST
• Top Panel • Two Side Panels • Trim (& hardware)
• (4) 10-24 Type F Thread-Cutting Screws • 7 Spring Clips
PANEL SIZING and PART NUMBERS
Model S i z e Size Installed (including trim) Black Trim
Pendleton (745/790) 8" 39 7/8" wide by 28" high 99300300
Pendleton (745/790) 10" 43 7/8" wide by 30" high 99300301
Pendleton (745/790) 12" 47 7/8" wide by 32" high 99300302
Rainier (945/990) 8" 41 3/4" wide by 28 7/8" high 99300306
Rainier (945/990) 10" 45 3/4" wide by 30 7/8" high 99300307
Rainier (945/990) 12" 49 3/4" wide by 32 7/8" high 99300308
Olympic (1190) 8" 45 1/4" wide by 28 7/8" high 99300312
Olympic (1190) 10" 49 1/4" wide by 30 7/8" high 99300313
Olympic (1190) 12" 53 1/4" wide by 32 7/8" high 99300314
INSTALLATION INSTRUCTIONS
1. With the insert 12” from the fireplace, install the side surround panels (see the directions below).
Avalon Pendleton-45 and Rainier-45:
Remove the brass trim along the top of the stove.
Button Plugs
(pry out with a screwdriver)
Side
Panel
5/16" Nutdriver
Attach the side panels with
the included screws (hint:
pre-thread the holes prior
to installing the panels).