Avalon Firestyles 864TRV GS Blower - Manual (Page 3)

864TRV GS – 564 SS GS
Blower Installation Instructions
(sku 99000162)
Page 3 of 4 17601556 - 9/6/13 © Travis Industries, Inc.
3 Insert the brass bushings into the rubber grommets on the vertical brackets on the blower assemblies
(both sides – see Figure 4).
Figure 4
4 Attach the blower assemblies to the fireplace with the included screws (see Figure 5 “a”). Remove the
cover plate from the fireplace and attach the snap disk using the same screws (see Figure 5 “b”).
Figure 5
HINT: It is easier to install the blower on the
side opposite the gas line entry point
(in this example on the left side).
Slide the blower behind the gas
control valve and burner gas lines.