ATEIS ECS - Manual (Page 50)

ECS MANUAL
Version EN.1
50
Schematic:
To avoid the problems explained above, a local echo suppressor is added between the
microphone and the listening system. The local echo suppressor component is split in two parts. The
Pre-Processing part take care of the residual echoes, and the Post-Processing part take care of the
feedback.
Design in the ECS:
Regarding the basic schematic above, here is the corresponding design which must be created
with Ateïs Studio software.
The input of the Local Echo Suppressor has to be linked to an input component where the
microphone is physically connected to the ECS.
The output of the Local Echo Suppressor has to be linked to an output component where the
listening system is physically connected to the ECS.
You can use any input/output channels of the ECS.