ATEIS ECS - Manual (Page 48)

ECS MANUAL
Version EN.1
48
TC Receive Component
The TC receive component allows to see the incoming call with the DTMF Decoder and provides
also some controls. Here you can adjust the audio level of the incoming caller signal and of the
incoming ringing signal that you will hear in the speaker connect to the TC receive output.
The auto-answer function is available, allowing the ECS to automatically answer the incoming call.
A Noise suppression can be activated, and also a line echo cancellation in order to reduce the
noise and the echo due to the telephone line.
Machine Status Area Parameters
Parameter Range Comment
Caller signals / Mute Button/led Mute the caller signal
Caller signals / Level -15 to 12(dB) Level control of the caller signal
Ring signals / Mute Button/led Mute the ring signal
Ring signals / Level -15 to 12(dB) Level control of the ring signal
Auto-answer Active the auto-answer function, by selecting after how many
rings the ECS will answer.
Noise suppression Button Active the noise suppression on the caller signal
DTMF decoder /
enabled
Button/led Enable the DTMF decoder
DTMF using Light when a DTMF signal is detected
DTMF history Display the last DTMF signal received
Line echo cancellation Button Active the echo cancellation on the line