Artesyn System Services Framework Installation and Use (February 2014) - Manual (Page 84)

Additional Information
System Services Framework Installation and Use (6806800S58B) 84
Normally is eth0 for PrAMC-7311. Change the following parameters in
the /etc/sysconfig/network-scripts/ifcfg-eth0 file.
BOOTPROTO=dhcp
ONBOOT=yes
5. Boot up the PrAMC-7311 with new ramdisk image.
6. The SSF start-up script will fetch the license files from the TFTP/DHCP server, which is
derived from /var/lib/dhclient/dhclient*.leases file.
Note: These license files are placed at TFTP server while installing the license for SSF. For
more information refer to
Chapter 3, Installing License on PrAMC-7311, on page 35 .