Artesyn System Services Framework Installation and Use (February 2014) - Manual (Page 55)

Chapter 4
System Services Framework Installation and Use (6806800S58B) 55
SSF Configuration
4.1 Overview
This section provides the details of different configuration options of SSF.
 SSF Core Configuration
 Blade SSF Core Configuration
 SSF Application Agent Configuration
4.2 SSF Core Configuration
SSF core consists of two sets of executable configuration files: SSF-Core (SSFd) and SSF-CSIM
(ssfcsimd). All SSF-Core (SSFd) executable configuration files are located at
/opt/ssf/etc/config/main/
and all CSIM (ssfcsimd) executable configuration files
are located at /opt/ssf/etc/config/csim/. The following table provides the list of
configuration files of SSF core and their config options.
Table 4-1 SSF Core Configuration Files
File Name Config Options Description
SSF-Core
cli.cfg IpAddress
Port numbers
Max Sessions
sessionTimeOut
This file consists of default IP address as
127.0.0.1. You can connect to the CLI using
localhost with the port number specified in the
cli.cfg
file and change the IP address to the
front panel IP address of the blade on which SSF is
running.
By default, the values are:
IpAddress: 127.0.0.1
Port numbers: 11001, 15000
Max Sessions: 5
sessionTimeOut: 300 sec