Artesyn System Services Framework Installation and Use (February 2014) - Manual (Page 83)

Additional Information
System Services Framework Installation and Use (6806800S58B) 83
B.6.1 Modifying Root File System to install SSF.
1. Place all the PrAMC-7311 RPMs from SSF-REL_/7311 and SSF-
REL_/7311/dependentRpms directories in a new directory.
For example: /opt/bladeservices/rpms.
2. Create S96ssfrpminstall.sh script in /etc/rc3.d/ directory.
3. Copy the following lines in S96ssfrpminstall.sh an script and place the same in /etc/rc3.d/
directory.
Note: Replace the following RPMs with latest SSF RPM versions. Provide executable
permissions for this script (using chmod +x /etc/rc3.d/S96ssfrpminstall.sh).
rpm -ivh /opt/bladeservices/rpms/bbs-hpib-2.5.1-1.x86_64-
wrspne3.0-linux.rpm --ignoresize
rpm -ivh /opt/bladeservices/rpms/orion-
license.pramc7311.windriver-pne3.0-1.0.0-18.i586.rpm --
ignoresize
rpm -ivh /opt/bladeservices/rpms/syslcu.pramc7311-3.2-
1.noarch.rpm --ignoresize
rpm -ivh /opt/bladeservices/rpms/libpqxx-2.6.8-
pne3.0.x86_64.rpm --ignoresize
rpm -ivh /opt/bladeservices/rpms/freeradius-1.1.7-
pne3.0.x86_64.rpm --ignoresize
rpm -ivh /opt/bladeservices/rpms/postgresql-9.1.3-
pne3.0.x86_64.rpm --ignoresize
rpm -ivh /opt/bladeservices/rpms/ssf_main_rel-7311-
1.1.5.x86_64.rpm --ignoresize
rpm -ivh /opt/bladeservices/rpms/ssf_csim_rel-7311-
1.1.5.x86_64.rpm --ignoresize
rpm -ivh /opt/bladeservices/rpms/ssf_gui_rel-2.22_7311-
ssf_1.1.5.x86_64.rpm --ignoresize
rpm -ivh /opt/bladeservices/rpms/ssf_gui_console_rel-7311-
1.1.5.x86_64.rpm --ignoresize
rpm -ivh /opt/bladeservices/rpms/ssf_bcsim_rel-7311-
1.1.5.x86_64.rpm -ignoresize
4. Enable the interface reachable to the tftpserver/dhcp server during startup. Set the
following parameters in /etc/sysconfig/network-scripts/ifcfg-interface>
.