Artesyn System Services Framework Installation and Use (February 2014) - Manual (Page 25)

Chapter 3
System Services Framework Installation and Use (6806800S58B) 25
SSF Installation
3.1 Overview
Please refer Chapter 2, Prerequisites, on page 21 for the hardware and software requirements
for installing SSF.
SSF contains four types of packages:
 SSF Core - It can be installed on either PrAMC-7311 or a connected PC with supported Linux
distribution.
 SSF GUI Agent - It is an application that interacts with the SSF to provide web interface for
accessing SSF managed system. Similar to SSF core, you can install SSF GUI agent on either
PrAMC-7311 or a connected PC with supported Linux distribution.
 Blade SSF Core - It is SSF agent on supported blades, which are present in the system. Blade
SSF core establishes communication between SSF core and other blades installed in the
system. SSF interacts with the system components through blade SSF core. It also provides
access to the platform services, such as syslog-ng, ntpd, dhcpd, sshd, vsftpd
and a user defined service syslcu installed on the blades. You can also add your own
platform services that can be managed using SSF.
 Application Agent - It is an interface between south-bound interface of SSF and north-
bound interface of application. It forwards all the requests from SSF Core to application
and vice versa.
The following table provides complete list of SSF RPMs. You can download these files from
SWORDS.
Table 3-1 SSF RPMs
RPM Description
SSF Core
ssf_main_rel--
.x86_64.rpm
Provides binary and configuration files of SSF Core to enable the
SSF interfaces and to interact with various applications. For
example, rpm -ivh ssf_main_rel-7311-
1.0.32.x86_64.rpm
is the SSF Core RPM for PrAMC-7311 blade.
ssf_main_rel-PC-
.i686.rpm
Provides binary and configuration files of SSF Core to enable the
SSF interfaces and to interact with various applications. For
example, rpm -ivh ssf_main_rel-PC-
1.0.32.el5.i686.rpm
is the SSF Core RPM for External PC.