Artesyn System Services Framework Installation and Use (February 2014) - Manual (Page 34)

SSF Installation
System Services Framework Installation and Use (6806800S58B) 34
3.2.4 Installing SSF Application Agent
To manage applications (ViewCheck and SRstackware TM ) using SSF, user needs to install SSF
Application Agents at corresponding blades. For example, to manage SRstackware on ATCA-
F140, you must install SRstackware agent for ATCA-F140 on the blade. Following is the
procedure for installing application agent on a blade:
1. Copy the following RPM to the blade where the SSF Application Agent needs to be
installed:
ssf__rel--..rpm
2. Run the following RPM command:
rpm -ivh ssf__rel--
..rpm
In the RPM command above, the string should be replaced with the
application agent of the application, which has to be accessed using SSF. The strings ,
and should be replaced with the blade name on which application is installed and
with version number of the SSF respectively. For example, in order to access ViewCheck
installed on ATCA-7370 blade, then the RPM is:
rpm -ivh ssf_diagnosticsTLS_rel-7370-1.0.19.x86_64.rpm
After the installation, all SSF application agent binary and configuration files are installed on
the blade at the /opt/ssf location.
Table 3-4 Directory Structure of SSF Application Agent
Folder Description Files
/opt/ssf/bin
This folder contains binaries of SSF
Application Agent.
ssf
.
For example, ssfsrsd is the
application agent for
SRStackware.
/opt/ssf/etc/con
fig/
Agent>/
This folder contains application agent
configuration files, if any application
is installed on the blade. For more
information, see
SSF Application Agent
Configuration on page 63 .
S99Ssf
>.sh
ssfApi.log
ssfApi.conf
ssf__
instances