Artesyn System Services Framework Installation and Use (February 2014) - Manual (Page 33)

SSF Installation
System Services Framework Installation and Use (6806800S58B) 33
Blade SSF core is an agents to SSF on respective blades and have to be installed on that blades
only. For example, blade SSF core for ATCA-F140 has to be installed on ATCA-F140. Name of the
target blade is included in the blade SSF core RPMs.
For example, ssf_bcsim_rel_atcaf140-2.3.38.ppc.rpm is for ATCA-F140 blade.
1. Copy the following RPM to the blade where blade SSF core to be installed:
ssf_bcsim_rel--..rpm
2. Run the following RPM command:
rpm -ivh ssf_bcsim_rel--..rpm
In the RPM command above, replace the strings , , and with the
blade name on which blade
SSF core to be installed, version number of SSF , and the architecture
respectively. For example, if the blade SSF core to be installed on ATCA-F125 blade, then the
RPM is:
rpm -ivh ssf_bcsim_rel-f125-1.0.19.ppc.rpm
After the installation, all blade SSF core binary and configuration files are installed on the blade
at the /opt/ssf location. The directory structure is described in the following table.
Table 3-3 Directory Structure of Blade SSF Core
Folder Description Files
/opt/ssf/bin/
Contains binaries of blade SSF
core agent.
ssfbcsimd
/opt/ssf/etc/confi
g
Contains configuration
information of blade SSF core
agent.
S99SsfBcsimRun.sh
bcsim
/opt/ssf/etc/conf
ig/bcsim/
Contains SSF-BCSIM
configuration files. For more
information, see
Blade SSF Core
Configuration on page 57 .
FUF.conf
SMAN.conf
ssfApi.log
scpExpectScript
ssfApi.conf
ssf_bcsim_instances
ssf_bcsim_location
/opt/ssf/lib/
Contains shared libraries used by
the SSF executables.
libSMAN.so