Artesyn PrAMC-7211 PNE3.0 Software Installation Guide (June 2014) - Manual (Page 54)

PrAMC-7211 Software Installation
PrAMC-7211-PNE3.0 Software Installation Guide (6806800L07B) 54
ACPI Error (psargs-0358): [\_PR_.CPU0._CST] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0530): Method parse/execution failed [\_PR_.CPU1._CST]
(Node ffff88007f990930), AE_NOT_FOUND
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
NOHZ: local_softirq_pending 20
Linux agpgart interface v0.103
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
console [netcon0] enabled
netconsole: network logging started
Driver 'sd' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1840 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1848 irq 15
ata1.00: ATA-7: ST980817SM, 3.AAD, max UDMA/133