Artesyn PrAMC-7211 PNE3.0 Software Installation Guide (June 2014) - Manual (Page 13)

Chapter 2
PrAMC-7211-PNE3.0 Software Installation Guide (6806800L07B) 13
PrAMC-7211 Software Installation
2.1 Installation Prerequisites
You should have an external:
 TFTP Server - Image is downloaded using TFTP.
 DHCP Server - Boot configuration required for software installation is provided through
DHCP configuration.
Extract the BBS image in the /tftpboot directory of the external TFTP Server.
2.2 PrAMC-7211 Software Packages
The PrAMC-7211 installation software is packaged in a single tar file PrAMC721x-WR-3.0-
BBS-RM01-1.0.2.tar.bz2
. Extract this tar file in the /tftpboot directory of the external
TFTP server.
After extracting the tar, PrAMC721x-WR-3.0-BBS-RM01-1.0.2 directory will be created
with the following files/directories:
Table 2-1 PrAMC-7211 Software Packages
Directories Packages Description
Disk
Contains files
for disk based
installation
files.sha1sum
List of packages with their checksum. During
controller card installation, installation script
downloads and validates all the packages in the list.
kernel
7211kernel
rootfs.tar.bz2
Root file system
modules.tar.bz2
Kernel modules for rootfs
minrootfs.cpio.gz
Installation rootfs (used only for disk installation)