Artesyn PrAMC-7211 PNE3.0 Software Installation Guide (June 2014) - Manual (Page 15)

PrAMC-7211 Software Installation
PrAMC-7211-PNE3.0 Software Installation Guide (6806800L07B) 15
bbs-hpmone-1.2-
3.0_RM01.windriver.
i386.rpm
Contains hpm.1 firmware image
bbs-ipmc-avr-1.2-
3.0_RM01.windriver.
i386.rpm
Contains IPMC firmware image
bbs-phoenixbios-
1.2-
3.0_RM01.windriver.
i386.rpm
Contains BIOS image
bbs-switchcfg-1.2-
3.0_RM01.windriver.
i386.rpm
Contains Switch configuration util
usb
Contains files
for usb based
installation
kernel
7211kernel
Initramfs.cpio.gz
Root file system
pxelinux.0
Pxelinux binary image
pxelinux.cfg/defaul
t
Pxelinux configuration file
Minrootfs.cpio.gz
Installation image
Table 2-1 PrAMC-7211 Software Packages (continued)
Directories Packages Description
It is not mandatory to extract the BBS tar ball in /tftpboot directory only. It can be
extracted any where but keep the following in mind:
1. The TFTP server should be able to send the files from that extracted location.
2. After extracting the BBS tar ball, the contents of PrAMC721x-WR-3.0-BBS-RM01-
1.0.2
directory should not be altered.
3. The DHCP configuration should pick pxelinux images from the respective directories,
that is, from xyz/ PrAMC721x-WR-3.0-BBS-RM01-1.0.2/disk/pxelinux.0
for disk installation and
from xyz/ PrAMC721x-WR-3.0-BBS-RM01-1.0.2/usb/pxelinux.0 for usb
installation.