ARRIS SBG6700 User Guide - Manual (Page 73)

Gateway Configuration Screen Definitions
SURFboard® SBG6700-AC Wireless Cable Modem Gateway • User Guide 62
365-095-25781 x.1
Port Triggers
You can use Port Triggers to configure dynamic triggers to specific devices on the LAN. This allows
special applications that require specific port numbers with bi-directional traffic to function properly.
Applications such as video conferencing, voice, gaming, and some messaging program features may
require these special settings.
Figure 53 – Advanced Create Port Triggers Screen
Figure 54 – Advanced Port Triggers Screen
Table 15: Advanced Port Triggers -Field Descriptions
Field Description
Trigger Start Port The starting port number of the Port Trigger range.
Trigger End Port The ending port number of the Port Trigger range.
Target Start Port The starting port number of the Port Target range.
Target End Port The ending port number of the Port Target range.
Protocol Select TCP, UDP, or BOTH from the drop-down list.
Description Name the port trigger.
Enabled Select On or Off to activate or deactivate the selected IP
port triggers.