ARRIS SBG6700 User Guide - Manual (Page 62)

Troubleshooting Tips
SURFboard® SBG6700-AC Wireless Cable Modem Gateway • User Guide 51
365-095-25781 x.1
Gateway Problem Possible Solution
Wireless devices cannot
send or receive data
• If the problem still persists after checking the coaxial cable and
Ethernet connections and your IP address, check the Wireless
Security Mode setting on the Wireless Primary Network screen.
• If you enabled WPA and configured a passphrase on the gateway, be
sure each affected wireless client has the identical passphrase. If this
does not solve the problem, check if the wireless client supports WPA.
• If you enabled WEP and configured a key on the gateway, be sure
each affected wireless client has the identical WEP key. If this does not
solve the problem, check whether the client’s wireless adapter
supports the type of WEP key configured on the gateway.
Front Panel LED Icons and Error Conditions
The SBG6700-AC front panel LED icons provide status information for the following error conditions:
Table 6: Front Panel LED Icons and Error Conditions
Led Icon
Status
If, During Startup:
If, During Normal
Operation
OFF Gateway is not properly plugged
into the electrical outlet Gateway is unplugged
BLINKING Downstream receive channel
cannot be acquired Downstream channel is
lost
BLINKING Upstream send channel cannot
be acquired Upstream channel is lost
BLINKING IP registration is unsuccessful IP registration is lost
OFF Led is disabled Led is disabled
OFF Led is disabled Led is disabled