ARRIS SBG6700 User Guide - Manual (Page 16)

Product Overview
SURFboard® SBG6700-AC Wireless Cable Modem Gateway • User Guide 5
365-095-25781 x.1
Rear Panel
Figure 2 – SBG6700-AC Rear View
Table 3: SBG6700-AC Rear Panel Ports & Connectors
Port Name Description
1 Two one-gigabit Ethernet ports for RJ-45 cable connections:
• Green - LED is ON - Indicates a device connection is detected
• Green - LED is Blinking - Indicates data traffic is in progress
• Amber - LED is ON – Indicates 10/100 Base-T connection(s)
• Amber - LED is OFF – Indicates GigE connection(s)
2 Reset button Recessed button can be used to reboot the gateway or reset the gateway settings.
• To reboot (or restart) the gateway, press the indented Reset button once using
the end of a paper clip or other small object with a narrow tip, and then release.
• To reset the gateway configuration back to the factory default settings, press
and hold the indented Reset button for 15 seconds using the end of a paper clip
or other small object with a narrow tip, and then release. See
Reset Your
Gateway Settings for more information on an alternative method to reset the
gateway settings using the SBG6700-AC Web Manager.
WARNING! Reset will also delete any custom gateway configurations, including
your user passwords and other security settings. You should back up the
gateway configuration files before resetting the gateway. See Back Up Your
Gateway Configuration for more information.