Advanced installation and adjustment, Print head pressure – Argox X Series User Manual
Page 78
78
5. Advanced Installation and Adjustment
This chapter describes installation and adjustment procedure for X
series indu
strial printers. It’s recommended to be carried out by
technicians, in order to keep overall printing performance.
Print Head Pressure
Printing quality can be fine adjusted based on which area on the
label the printing quality discrepancy is located.
A. Right Hand Side Enhancement
If the phenomena as shown in Fig. 1 been observed, please turn
the Fine Adjustment Knob counter-clockwise slightly then try
printing again to justify the printing quality improvement as shown in
Fig.2. Repeat the same process until the printing quality is well
balanced on both ends of the label.
Figure 1
Figure 2