Argox X Series - Manual (Page 44)

44
CLEAR FLASH NO
YES
NO
When “YES” is
selected, all the label
forms, soft fonts, and
graphics stored will be
deleted.
SETTING
PRIORITY COMMAND/
LCD PANEL
COMMAND Choosing priority of
LCD settings. It
decides which setting
method - by command
or by LCD panel, is
prior.
Ethernet settings and parameters
(X-2300E. X-2300ZE. X-3200E. X-3200ZE):
Item Range Factory
Default
Remarks
DHCP DISABLE
ENABLE
If printer has been connected to a
router, IP address will be assigned
automatically by DHCP server after
power on.
If printer is not connected to a
router, with DHCP disabled,
settings of IP ADDRESS, SUBNET
MASK, and DEFAULT GATEWAY
settings will be available on LCD.
Every time when DISABLE is
changed to be ENABLE, LCD will
prompt “ETHERNET CARD
UPDATE FINISH…”