Argox X Series - Manual (Page 39)

39
LCD Function Setting Procedure
The following procedure is an example of setting procedure
to direct thermal printing mode:
LCD indicating LCD setting steps
READY (203,PPLB)
After printer power in on, LCD will indicate
as shown at the left.
Step 1 Press both PAUSE + CANCEL buttons.
Then release the buttons to enter settings.
PRINT MODE
THERM. TRANSFER*
LCD will then prompt LCD function
selections; default settings include the “*”
sign. For example, the first option of print
modes is thermal transfer.
Step 2
Keep press FEED button until LCD
prompts the function setting needed.
PRINT MODE
DIRECT THERMAL
For example, the second option of print
modes is direct thermal.
Step 3
Press CANCEL button to store the setting.
PRINT MODE
DIRECT THERMAL *
The option selected will now include the “*”
sign.
Step 4 Press PAUSE button to continue the other
settings.
Back to standard
printing mode
After LCD function settings are completed,
press both PAUSE + CANCEL and then
release them to exit from settings.
READY (203,PPLB) Now printer is in normal printing mode.