Argox X Series - Manual (Page 33)

33
The front panel includes:

3 LED indicators (READY, MEDIA and RIBBON)

3 buttons (FEED, PAUSE and CANCEL)

LCD display (except X-1000VL)

Top Access Door

Front Access Door
LED Indicators
There are three LED indicators on the front panel - READY,
MEDIA and RIBBON. These indicators display operation status of
the printer.
READY On
– Normal operation
Off
– Error conditions including ribbon out, media
out, print tasks cancelled, printing errors, printer
paused, printer receiving data
MEDIA On
– Normal operation
Blinking
– Media is used out; install new media.
Print head overheat
(LCD will indicate “Print Head
Heat”; printer will resume printing automatically
later.)
RIBBON On
– thermal transfer mode with ribbon installed.
Off
– direct thermal mode with no ribbon installed.
Blinking
– Ribbon is used out; install new ribbon.
For the X-2000V / X-2000V Zip / X-2300 / X-2300Z /
X-2300E / X-2300ZE / X-3200 / X-3200Z / X-3200E /
X-3200ZE models, modes of thermal transfer and