Argox X Series - Manual (Page 55)

55
Serial (RS-232) Port
The required cable must have a nine-pin "D" type male connector
on one end, which is plugged into serial port located on the back
of the printer. The other end of the cable connects to a serial port
on the host computer. For technical and pin-out information,
please refer to the Technical Reference in this manual.
Note:
1. Centronics allows a much higher communication speed than
serial.
2. The pin assignment of serial cable is different from PC. Please
contact your local Argox reseller if you need this cable.
Centronics
Parallel
USB
PS/2
Serial (RS-232)
Power Switch
AC Power
connector