Loading ribbon – Argox X Series User Manual

Page 13

Text mode
Original mode

Loading Ribbon

Note: Thermal Transfer printing requires media to print with
appropriate ribbon. This section can be referred to, for X-Series
to use transfer thermal printing. The sample steps below are
based on ribbon wound ink-side in as an example. (X series

printers use ribbon wound ink-side in as default. To change
setting to ribbon would ink-side out, refer to Section - Switching
Ribbon Wound Ink-side out or Ink-side in)

1. Lift the top cover and front access door to expose the

media compartment. (Figure 1)

2. Turn the head latch counter-clockwise and open the

bracket. (Figure 2)