Analog Way PULSE2 (MIDRA) - Ref. PLS350 User Manual - Manual (Page 60)

60
8.2.24 Working with audio
8.2.24 Working with audio
Into the audio menu, you will find some audio adjustments:
• Audio mode:
- NO AUDIO: the audio of your device is switched off
- PRESET MODE: the standard mode of use of the device
You have two possibilities:
▪ Top layer: the sound on the output will follow the audio input of the top layer.
▪ Breakaway: when breakaway is activated, the audio on the output is memorized into the preset. A change
of preset, changes the audio on the output. A change of content into a video layer has no effect on the
audio.
- ROUTING MODE: in this configuration, simply choose an audio input to assign it to the output. The audio
configuration remains the same during the show.
• Source settings: into this menu you will have access to all source settings:
- ANALOG SETTINGS:
▪ Mute: select to mute the input
▪ Stereo: select to choose between mono or stereo input
▪ Analog gain: set up the analog gain of your analog input (0 for 4dBu)
▪ Level/balance: select to adjust the input audio level and right and left balance.
- DIGITAL AUDIO:
▪ SPDIF/AES3: choose the digital audio output mode
• Main audio/prelist audio: define the main or prelist audio settings:
- PRESET MODE:
▪ Top layer: the sound on the output will follow the audio input of the top layer.
▪ Breakaway: when breakaway is activated, the audio on the output is memorized into the preset. A change
of preset, changes the audio on the output. A change of content into a video layer has no effect on the
audio.
▪ Master mute: select to mute your master audio
▪ Stereo: select to choose between mono or stereo output
▪ Analog level: set up the analog gain of your analog output (4dBu by default)
▪ Master volume: set your master volume of the output
▪ Balance: set the right/left balance of your output.
8.2.25 Special features
- DYNAMIC FIT
(automatically activates the transparent background)
• Automatic adjustment of the layer (Ratio) to fit the source image borders during a transition.
• Dynamic & Automatic adjustment of the layer to fit the source image borders (Black Stripe).
- SMOOTH MOVE EFFECT
• Smooth Move layer control the acceleration of the layer. The time can be different between the opening
and closing layer,
- WORKING WITH DSK (Chroma / Luma key)
• Pulse² allows to use a live source with green or blue (or any color) background and to key it over another