Analog Way PULSE2 (MIDRA) - Ref. PLS350 User Manual - Manual (Page 30)

30
7.1 Operating mode
Mixer mode
7. OPERATING THE PULSE² FROM THE RCS²
7.1 Operating mode
Before you start setting up your Pulse² for the first time, take some time to think about how you will be using
it. The Pulse² offers a choice of two operating modes, which results in a versatile video production tool for
live event staging and fixed installation applications.
NOTE: We recommend resetting the device to its default values every time you set up your shows or events.
This mode allows for a single Pulse² to seamlessly switch any of its 8 analog/digital inputs with any other of
the inputs, add PIP, titling or logo insertion to the live frame, while previewing your every move before going
live, to avoid embarrassing errors on your main screen.
Frame
Layer A
Layer B
Logo 1
Quick Frame
Logo 2
Background
Foreground
Go to the setup section to start to set up
your unit. A Setup assistant is available
to help you to correctly adjust all basic
setups of your unit.
*Video out: Pulse² - Ref. PLS350-3G only
7.2 Setup
The device can work in 2 different modes, Mixer mode or Matrix mode.
7.2.1 Mode