Analog Way PULSE2 (MIDRA) - Ref. PLS350 User Manual - Manual (Page 38)

38
7.2.8 Logo/frame management
Select the area you want to save using the adjustable
white square.
Once it is ok, simply click on execute to save the logo.
How to save a frame:
Choose first Program or Preview, click on FREEZE if you
want to freeze your output. Then click on EXECUTE to save
your frame into the selected slot.
Into this section, choose the output format of the video output.
You will find the status of your output and the possibility to choose the test pattern. In addition, you can
adjust:
- FLICKER: choose the value of the flicker filter to disable the flicker effect on your screen (interlaced lines
effect),
- GAMMA: increase or decrease the gamma of your output,
- OVERSCAN: enable/disable the overscan/underscan,
- SHARPNESS: adjust the sharpness of the image.
Clicking on Layout, you have the choice between a 4/3 or a 16/9
aspect ratio.
You can still play with the H/V position and H/V size in order to adjust
accurately the video out image on your final screen.
7.2.9 Video out (Only for the Pulse² - Ref. PLS350-3G)